Faculty of Engineering and Technology Jamia Millia Islamia

Faculty of Engineering and Technology Jamia Millia Islamia : Address, Location, Type of Institution & Facilities, Contact Details, E-mail ID & Website, Courses offered, Eligibility for admission, Admission Procedure, Ranking, Cut off, Fee Structure & Placements in Faculty of Engineering and Technology Jamia Millia Islamia.


Address of Faculty of Engineering and Technology Jamia Millia Islamia
Jamia Millia Islamia, Maulana Mohammad Ali Jauhar Marg, Jamia Nagar, New Delhi – 110025, District South Delhi, NCT of Delhi
Location of Faculty of Engineering and Technology Jamia Millia Islamia
7 Km from Okhla Metro Station, 14 Km from New Delhi Metro Station
Type of Institution & Facilities

The Faculty of Engineering and Technology Jamia Millia Islamia was established in the year 1985 by Jamia Millia Islamia (A Central University). The Jamia Millia Islamia has been declared a Minority Educational Institution under Article 30 (1) of the Constitution of India read with Section 2 (g) of the National Commission for Minority Educational Institutions Act by the Commission.

The University has Wi-Fi Campus, Well-equipped Labs & Workshops, Dr. Zakir Husain Central Library, Separate Hostels for boys & girls, A branch of Indian Bank, ICT, Sports facility, Placement Cell.

Affiliated to
Jamia Millia Islamia (A Central University established by an Act of Parliament & Accredited by NAAC with ‘A’ Grade)
Approved by
All India Council for Technical Education, Ministry of Human Resource Development, New Delhi;
Directorate of Training & Technical Education, Government of NCT of Delhi
Contact Details of Faculty of Engineering and Technology Jamia Millia Islamia
Email-id of Faculty of Engineering and Technology Jamia Millia Islamia
Website of Faculty of Engineering and Technology Jamia Millia Islamia
Contact No. of Faculty of Engineering and Technology Jamia Millia Islamia
011-26985831, 011-26981261
011-26981717, 011-26984617, 011-26984658, 011-26988044, 011-26987183 (Jamia Millia Islamia)
Admission Helpline No. of Faculty of Engineering and Technology Jamia Millia Islamia
098362-19994, 098362-89994, 098363-19994
Fax No. of Faculty of Engineering and Technology Jamia Millia Islamia
011-26980229 (Jamia Millia Islamia)
Office Hours
9.00 A.M. to 5.00 P.M.
Support us while you shop online—use our affiliate links to purchase your favorite products and help us continue providing great content!
Click the link below to find out the deals of the day on Amazon!
Image - Faculty of Engineering and Technology Jamia Millia Islamia

Checkout these useful gadgets and accessories for you:

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
As an Amazon Associate, we earn commission from qualifying purchases made through links on this page/post at no extra cost to you.

Courses Offered by Faculty of Engineering and Technology Jamia Millia Islamia
Under Graduate Courses:
  • B.Tech. Computer Engineering
    Seats – 70 (1st Shift)
  • B.Tech. Electronics & Communication Engineering
    Seats – 70 (1st Shift)
  • B.Tech. Electrical Engineering
    Seats – 70 (1st Shift)
  • B.Tech. Civil Engineering
    Seats – 70 (1st Shift)
  • B.Tech. Mechanical Engineering
    Seats – 70 (1st Shift)
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
Sr. Sec. School Certificate (10+2)/ Intermediate or its equivalent of a recognized Board of Education with Physics, Chemistry and Mathematics as their main subjects, with not less than 55% marks in PCM OR Diploma in Engineering recognized by AICTE or a State Board of Technical Education of 3 or 4-year duration with not less than 55% marks. The age of the candidate should not be less than 17 years on 1st October of the year of admission.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) in each discipline is reserved for Kashmiri Migrants & One seat (over and above total seats) in each discipline is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The admission is based on the merit/ rank in the JEE (Main) Paper 1 conducted by National Testing Agency (For details visit www.nta.ac.in or https://jeemain.nta.nic.in).
The Jamia Millia Islamia invites On-line Applications in the month of January/February every year. The candidates are required to register & fill the Application form On-line only. The Counselling for admission is conducted by JMI (For details visit https://jmi.ac.in or https://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025).
Duration
Four Academic years comprising of 8 Semesters.
Under Graduate Courses [Evening Shift]:
  • B.E. Civil Engineering
    Seats – 70
  • B.E. Computer Engineering
    Seats – 70
  • B.E. Electrical Engineering
    Seats – 70
  • B.E. Electronics & Communication Engineering
    Seats – 70
  • B.E. Mechanical Engineering
    Seats – 70
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
Three/four year Diploma Course in respective or relevant branch from a recognized Polytechnic or Technical Institute with at least two years professional experience after passing Diploma in respective or relevant branch. However, for B.E. (Computer Engg.), three/four year Diploma either in Computer Engg. or in Electronics & Communication Engg. or in relevant branch is required together with at least two years Professional Experience after Diploma. The experience is reckoned from the date of declaration of result/date of issue of mark-sheet of qualifying examination or the date of beginning of professional engagement (whichever is later) till the last date of submission of Application Form. The Documentary evidence of declaration of result is required at the time of admission.
The Diploma holders from University Polytechnic, J.M.I securing 70% marks or more are eligible to appear in the Entrance Test without Professional Experience.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) in each discipline is reserved for Kashmiri Migrants & One seat (over and above total seats) in each discipline is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia invites On-line Applications in the month of February/March every year. The candidates are required to register & fill the Application form On-line only. However, the actual admission process for Evening Programs starts in the month of September/October. The admission is based on the score in an Entrance Test conducted by JMI (For details visit https://jmi.ac.in or https://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025).
Duration
Four Academic years.
Post Graduate Courses:
  • M.Tech. Environmental Science & Engineering
    Seats – 10 (Full Time) + 10 (Part Time)
  • M.Tech. Electrical Power System & Management
    Seats – 22 (Full Time)
  • M.Tech. Control & Instrumentation System
    Seats – 22 (Full Time)
  • M.Tech. Mechanical Engineering
    Seats – 18 (Full Time)
  • M.Tech. Electronics & Communication Engineering
    Seats -20 (Full Time)
  • M.Tech. Computer Engineering
    Seats – 20 (Full Time)
  • M.Tech. Earthquake Engineering
    Seats – 20 (Full Time)
  • M.Tech. Energy Sciences
    Seats – 20 (Self-financed)
  • M.Tech. Computational Mathematics
    Seats – 20 (Self-financed)
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
For M.Tech. Environmental Science & Engineering: Bachelor’s Degree in Civil Engg./ Mechanical Engg./ Chemical Engg./ Electrical Engg./ Metallurgical Engg./ Mining Engg./ Agricultural Engg. or any other equivalent and relevant Degrees in Engg. and Technology only with not less than 60% marks in absolute system or equivalent grades of 6.75 on a 10 point scale.
For Part-Time Program: The in-service Graduate Engineers working in the field of Environmental Engg. are eligible. These candidates are required to produce at the time of admission, as the case may be, either NOC from the current employer or the proof of being self employed/entrepreneur.
For M.Tech. Electrical Power System & Management: Bachelor’s Degree in Electrical Engg. with not less than 60% marks in an absolute system or a minimum grade of 6.75 on a 10 point scale.
For M.Tech. Control & Instrumentation System: Bachelor’s Degree in Electrical Engg./ Instrumentation & Control Engg./ Electronics & Communication Engg. with not less than 60% marks in an absolute system or a minimum grade of 6.75 on a 10 point scale.
For M.Tech. Mechanical Engineering: First Class Bachelor’s Degree in Mechanical Engg./ Production Engg./ Automobile Engg./ Manufacturing & Automation Engg.
For M.Tech. Electronics & Communication Engineering: Bachelor’s Degree in Electronics Engg./ Electronics & Communication Engg./ Electronics & Instrumentation Engg. or equivalent examination with not less than 60% marks in an absolute system or a minimum grade of 6.75 on a 10 point scale.
For M.Tech. Computer Engineering: Bachelor’s Degree in Computer Engg./ Computer Science/ Information Technology OR MCA/M.Sc. (Computer Science)/ M.Sc.(IT)/ MSc.(IMCA) or equivalent with not less than 60% marks in the absolute system or a minimum grade of 6.75 on a 10 point grade.
For M.Tech. Earthquake Engineering: Bachelor’s Degree in Civil Engg. with not less than 60% marks in an absolute system or a minimum grade of 6.75 on a 10 point scale.
For M.Tech. Energy Sciences: B.E./ B.Tech in Mechanical Engg./ Electronics Engg./ Electrical Engg./ Chemical Engg./ Petrochemical Engg./ Materials Science/ Nanoscience/ Nanotechnology/ Energy Studies/ Energy Science/ Energy Technology OR M.Sc.in Physics/ Applied Physics/ Electronics/ Chemistry/ Applied Chemistry/ Nanoscience/ Material Science/ Energy Studies/ Energy Tech with at least 55% marks or equivalent CGPA.
For M.Tech. Computational Mathematics: B.E./ B.Tech. in Electronics Engg./ Computer Engg./ Electrical Engg./ Mechanical Engg./ IT with at least 55% marks or equivalent OR M.Sc. in Mathematics/ Applied Mathematics/ Physics/ Applied Physics/ Operational Research/ Statistics/ Computer Science/ Mathematics with Computer Science/ Bioinformatics OR MCA with at least 55% or equivalent CGPA.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) in each discipline is reserved for Kashmiri Migrants & One seat (over and above total seats) in each discipline is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia invites On-line Applications in the month of February/March every year. The candidates are required to register & fill the Application form On-line only. The admission is based on the score in an Entrance Test conducted by JMI. The Entrance Test for M.Tech. Control & Instrumentation Systems/ Electrical Power System Management/ Mechanical Engg./ Electronics & Communication Engg./ Computer Engg. is conducted at these Centres – Calicut, Delhi, Guwahati, Kolkata, Lucknow, Patna, Srinagar. The Entrance Test for other M.Tech. Programs is conducted by JMI at the University Campus (For details visit https://jmi.ac.in or https://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025).
Duration
Two Academic years comprising of 4 Semesters for Full-Time Course, Three Academic years comprising of 6 Semesters for Part-Time Course.
Ph.D. Programs:
  • The Faculty of Engineering and Technology Jamia Millia Islamia offers Ph.D. in Civil Engineering, Computer Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, Applied Sciences & Humanities.
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
A Second Class Master’s Degree with not less than 55% marks from a recognized University in the subject in which the candidate wishes to pursue a course of research or in a subject allied thereto.
The candidates who have qualified UGC/CSIR NET/JRF examination or any other equivalent examination conducted by the recognized Government Department/ Institute/ Agency/ SLET/ valid GATE Score (with qualifying marks)/ DST – Inspire Fellows. OR The teacher fellowship holders of the recognized College/ University/ Institution, provided that the competent employing authority issues a NOC to the candidate to join Ph.D. Programme OR ICCR-Sponsored candidates.
The Central/ State government/ PSU employee(s) should apply thorough proper channel and should produce NOC at the time of Interview.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia notifies admission to Ph.D. Programs, usually in the month of July each year (For details visit http://jmi.ac.in or http://jmi.ac.in/admissions).
Other Courses Offered by Faculty of Engineering and Technology Jamia Millia Islamia
Diploma Courses (At University Polytechnic):
  • Diploma Civil Engineering
    Seats – 72 (Regular) + 72 (Self-financed)
  • Diploma Computer Engineering
    Seats – 72 (Regular) + 72 (Self-financed)
  • Diploma Electrical Engineering
    Seats – 72 (Regular) + 72 (Self-financed)
  • Diploma Electronics Engineering
    Seats – 72 (Regular) + 72 (Self-financed)
  • Diploma Mechanical Engineering
    Seats – 72 (Regular) + 72 (Self-financed)
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
Secondary School/ High School Certificate of a recognized Board with not less than 45% marks in Science and Maths, or PCM as the case may be (Other than Bioscience) OR Senior Secondary School Certificate/ Intermediate or an equivalent exam. from a recognized Board with not less than 40% marks in aggregate of Science and Maths or PCM as the case may be (other than Bioscience) OR Equivalent Certificate Course from an Institute recognized by State/ Central Govt. or Sr. Sec. School Certificate in Vocational Engg. with not less than 50% marks in aggregate.
The age of the candidate should not be less than 15 years on 1st October of the year of admission. The candidates who have passed the qualifying examination with Elementary Mathematics & Elementary Science are not eligible for admission.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) in each discipline is reserved for Kashmiri Migrants & One seat (over and above total seats) in each discipline is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia invites On-line Applications in the month of February/March every year. The candidates are required to register & fill the Application form On-line only. The admission is based on the score in an Entrance Test conducted by JMI at these Centres – Calicut, Delhi, Guwahati, Kolkata, Lucknow, Patna, Srinagar. The Entrance Test for Self-financed Programs is conducted by JMI at the University Campus (For details visit http://jmi.ac.in or http://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025).
Duration
Three Academic years comprising of 6 Semesters for Regular course.
Three Academic years for Self-financed course (Classes are held from 05:30 P.M. to 09:30 P.M. on Mon-Sat. & Lab. Classes from 09:00 A.M. to 05:00 P.M. on Sunday).
Under Graduate Courses:
  • B.Sc. Aeronautics (Mechanical/ Avionics)
    Seats – 27 (Mechanical) + 27 (Avionics)
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
Senior Secondary School Certificate (10+2)/ Intermediate or its equivalent from a recognized Board with Physics, Chemistry and Mathematics as main subjects, with not less than 55% marks in PCM OR Three or four years Diploma in Engineering, recognized by AICTE or a State Board of Technical Education or a University with not less than 55% marks in aggregate.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) in each discipline is reserved for Kashmiri Migrants & One seat (over and above total seats) in each discipline is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia invites On-line Applications in the month of February/March every year. The candidates are required to register & fill the Application form On-line only. The admission is based on the score in an Entrance Test conducted by JMI at the University Campus (For details visit https://jmi.ac.in or https://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025). The Foreign students have to obtain security clearance from DGCA for admission to this program.
Duration
Three Academic years comprising of 6 Semesters.
Post Graduate Courses:
  • M.Sc. Electronics (Department of Applied Sciences & Humanities)
    Seats – 33
Eligibility in Faculty of Engineering and Technology Jamia Millia Islamia
B.Sc. (Hons.) Electronics/ Physics/ Instrumentation OR Bachelor of Applied Science (Hons.) in Instrumentation/ Bachelor of Applied Science in Instrumentation OR B.Sc. Instrumentation/ Electronics OR B.Sc. (Pass)/ B. Vocational Solar Energy Degree with Physics, Maths as optional subjects with at least 50% marks or equivalent grade in qualifying examination.
Note: 30% seats are reserved for Muslim applicants, 10% seats are reserved for Women applicants who are Muslims, 10% seats are reserved for OBCs-NCL and ST category candidates who are Muslims (as per the list notified by the Central Govt.) & 5% seats are reserved for PD category candidates. 5% seats are filled by Internal students of JMI who have passed their qualifying examination (X or XII) from Jamia Schools as regular students. One seat (over and above total seats) is reserved for Kashmiri Migrants & One seat (over and above total seats) is reserved for candidates from J & K.
Admission Procedure in Faculty of Engineering and Technology Jamia Millia Islamia
The Jamia Millia Islamia invites On-line Applications in the month of February/March every year. The candidates are required to register & fill the Application form On-line only. The admission is based on the score in an Entrance Test conducted by JMI at the University Campus (For details visit http://jmi.ac.in or http://jmi.ac.in/admissions).
The Foreign Nationals/ NRI’s may apply as Regular candidates under General category/ against Supernumerary Seats/ as ICCR (Indian Council for Cultural Relations) Sponsored Candidates. These candidates must apply through Foreign Students’ Advisor (The Office of the Foreign Student Advisor, Room No : 20-21, Gate No : 8, Old SRK Hostel Building, Jamia Millia Islamia, Jamia Nagar, New Delhi – 110025).
Duration
Two Academic years comprising of 4 Semesters.
Fee Structure of Faculty of Engineering and Technology Jamia Millia Islamia
COURSE FEE PER ANNUM
B.Tech. Rs. 16,150/-
M.Tech. Rs. 18,350/-, Rs. 15,500/- (Environmental Sci. & Engg.), Rs. 55,100/- (Energy Sci., Computational Maths)
Diploma Engg. Rs. 8,970/- (Regular), Rs. 27,720/- (Self-financed)
B.Sc. Aeronautics Rs. 1,30,100/-
M.Sc. Electronics Rs. 16,150/-
  • The Foreign Nationals/ NRI’s who seek admission as Candidates Under General Category have to pay US$ 1800 per annum.
  • The Foreign Nationals/ NRI’s who seek admission against Supernumerary Seats have to pay US$ 3600 per annum. In addition to that, these candidates have to pay an amount of Rs. 2,000/- as Admission Fee and Rs. 8,000/- as Refundable Security at the time of admission. These candidates are given a concession of US$ 500, if they are from SAARC Countries or they possess proper documentation of “Refugee Status”.
  • The ICCR Sponsored candidates have to pay the same amount of fee as paid by Indian candidates.
Placements in Faculty of Engineering and Technology Jamia Millia Islamia
The companies visiting the campus of Jamia Millia Islamia for Placement are – TCS. The maximum salary package to IT student offered was 15.25 Lacs/annum. The highest package offered to Diploma students was 3.18 Lacs/Annum. The International placements in Japanese companies include OJI Holding Corporation, Hikari Tsushin Tokyo, Work in DENA Yahoo Japan and Hong Kong University of Science & Technology. The maximum package offered equivalent to Rs. 28 lacs/annum by Hikari Tushin, Japan.


Click on the Buy From Amazon button to find out the deals of the day!
Image - Faculty of Engineering and Technology Jamia Millia Islamia

Below are three unique Amazon stores, which you might not know of. When you purchase anything from the below Amazon Stores, you not only help us by using our affiliate links, you also help the artisans, entrepreneurs, startups, emerging brands and amazing women of India.

Discover Traditional, Creative, Ethnic, Authentic, Decorative and Intricate Crafts by Indian Artisans The Newest Products from Emerging Indian Brands at the Best Prices. Grab Samples at INR 1 only! Checkout the Amazing Products Being Crafted, Designed, Manufactured by the Amazing Women of India.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
As an Amazon Associate, we earn commission from qualifying purchases made through links on this page/post at no extra cost to you.

Faculty of Engineering and Technology Jamia Millia Islamia

Share Your Thoughts Here.....

This site uses Akismet to reduce spam. Learn how your comment data is processed.